Faber 3081 TPI Tailpiece Insert Bushings Aged Nickel Finish
Faber
These inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full detailsThese inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full detailsLightweight aluminum compensated wraparound tailpiece based on the original lightning design. Tired of playing only to the 7th fret? This is the so...
View full detailsFaber® NSWKIT STEEL Bridge Studs/Thumbwheels for Nashville equipped guitars This is the solution for owners of Nashville equipped guitars who want ...
View full detailsOur exclusive No Gap technology is also available in our Tone-Lockª Bridge. Light years ahead of the usual set screw method of locking a bridge to ...
View full detailsFaber¨ NSWKIT STEEL Bridge Studs/Thumbwheels for Nashville equipped guitars This is the solution for owners of Nashville equipped guitars who want ...
View full detailsFaber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S....
View full detailsThese studs are made to original vintage spec, from the finest available German steel, in 5/16-24 thread pattern. Will fit any USA made Gibson® wit...
View full detailsThese studs are made to original vintage spec, from the finest available German steel, in 5/16-24 thread pattern. Will fit any USA made Gibson® wit...
View full detailsReplacement saddles, WITH small starter notches dead center, for all Faber® bridges that have removable saddles. Includes extra retaining Replaceme...
View full detailsPerhaps the most vintage correct replacement bridge available on the market today! No rattle-causing retainer wire! Flat top saddles provide tight,...
View full detailsOur exclusive “No Gap” technology is also available in our Tone-Lock™ Bridge. Light years ahead of the usual “set screw” method of locking a bridge...
View full detailsEnhance you guitar even further with the Faber¨ Tone-Lock KIT. The KIT includes our basic Tone-Lock studs and spacers and a Faber¨ TP-59 super ligh...
View full detailsOur basic “Tone-Lock”™ is comprised of unique “vintage” STEEL studs and spacers, featuring our solid “No Gap” technology, and can be used with any ...
View full detailsFaber¨ ABRM Bridge: For 4MM metric bridge posts and the Faber¨ E-Sertª, when the E-Sertª is used for conversion of Epiphone and many other non U.S....
View full detailsPerhaps the most vintage correct replacement bridge available on the market today! No rattle-causing retainer wire! Flat top saddles provide tight,...
View full detailsFaber® Metric Tailpiece Bushings, for Epiphone and most other non USA made guitars. Replace the cheap, non-steel original tailpiece bushings with a...
View full detailsOur basic “Tone-Lock”™ is comprised of unique “vintage” STEEL studs and spacers, featuring our solid “No Gap” technology, and can be used with any ...
View full detailsOur basic “Tone-Lock”™ is comprised of unique “vintage” STEEL studs and spacers, featuring our solid “No Gap” technology, and can be used with any ...
View full detailsFollowing up on the success of the innovative Faber® iNsert, we are happy to announce the new Faber® E-sert, for most Epiphone and many other Japan...
View full detailsEnhance you guitar even further with the Faber¨ Tone-Lock KIT. The KIT includes our basic Tone-Lock studs and spacers and a Faber¨ TP-59 super ligh...
View full detailsThe BSWKIT will give your Nashville bridge equipped guitar the vintage look, while, at the same time, enhancing your tone with steel posts that pro...
View full detailsReplacement bridge studs for Epiphone and other non USA made guitars. Works with Faber¨ ABRM or Tone-Lockª Bridge. Simply remove & replace exis...
View full detailsReplacement saddles, WITH small starter notches dead center, for all Faber® bridges that have removable saddles. Includes extra retaining Replaceme...
View full detailsFaber iNsert™ Gloss Gold, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now h...
View full detailsThe BSWKIT will give your Nashville bridge equipped guitar the “vintage” look, while, at the same time, enhancing your tone with steel posts that p...
View full detailsThese studs are made to original vintage spec, from the finest available German steel, in 8M x 1.25 thread pattern. Will fit most imports with 8M x...
View full detailsFaber NSWKIT STEEL Bridge Studs/Thumbwheels for Nashville equipped guitars This is the solution for owners of Nashville equipped guitars who want t...
View full detailsReplacement bridge studs for Epiphone and other non USA made guitars. Works with Faber¨ ABRM or Tone-Lockª Bridge. Simply remove & replace exis...
View full detailsFaber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S....
View full detailsAt Faber®, innovation never stops! Introducing “Tone-Bar™” – the next generation in compensated wraparound bridges/tailpieces. Utilizing “tone-ba...
View full detailsSold in sets of 6, for use with Faber¨ Tone-Lock tailpiece studs, INCH or METRIC. Two each in 2.5mm, 4.0mm and 5.5mm. Enables you to lock down your...
View full detailsEnhance you guitar even further with the Faber® “Tone-Lock”™ KIT. The KIT includes our basic “Tone-Lock”™ studs and spacers and a Faber® TP-59 supe...
View full detailsThese inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full detailsReplacement saddles screws for Faber® bridges. Includes 3 each of saddle screw, teflon washer, and retaining ring. Set of 3 Faber saddle screws H...
View full detailsSold in sets of 6, for use with Faber¨ Tone-Lockª tailpiece studs, INCH or METRIC. Sold in sets of 6. Two each in 2.5mm, 4.0mm and 5.5mm. Enables...
View full detailsFaber iNsert™ Gloss Gold, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now h...
View full detailsSubscribe for the latest information on new products and promotions.
Monday 11AM - 4PM
Tuesday 11AM - 4PM
Wednesday 11AM - 4PM
Thursday 11AM - 4PM
Friday 11AM - 4PM
Saturday 10AM - 3PM
Sunday Closed
EMAIL
Info@visionguitar.com
For Pedalboard Build Inquiries:
Bryan@Visionguitar.com
Matt@VisionGuitar.com
STORE ADDRESS
6300 San Ignacio Ave Suite C
San Jose, CA 95119
Copyright © 2024 Vision Guitar.